PL DE EN

KOPRO 30, Profil

, REF. B7890ANODA
Profil led Lipod - Kluś Design
Akcesoria:
Profil led Lesto KluśKOPRO 30-L MET, Endkappe (links), REF.24177
Profil led Lesto KluśKOPRO 30-P MET, Endkappe (rechts), REF.24178
Profil led Lesto KluśKOPRO 30-P MET, Endkappe (links), REF.24179
Profil led Lesto KluśGP Andrückfeder, REF.00293
Profil led Lesto KluśKOPRO 30-L MET, Endkappe (rechts), REF.24176
Profil led Lesto KluśKOPRO 30-P, Endkappe (links), REF.24175
Profil led Lesto KluśKOPRO-L Abdeckung opak, REF.17092
Profil led Lesto KluśKOPRO 30-L, Endkappe (rechts), REF.24172
Profil led Lesto KluśKOPRO 30-L, Endkappe (links), REF.24173
Profil led Lesto KluśKOPRO 30-P, Endkappe (rechts), REF.24174
Profil led Lesto KluśKOPRO-P Abdeckung opak, REF.17091
kopro30_roz.gif1kopro30_album_P.jpg2kopro_01.jpg3kopro_02.jpg4kopro_03.jpg5

Wide cover, strong source of light with 2 LED stripes
Easy mounting using the screws
Room to hide power wire

Beschreibung
The KOPRO-30 extrusion is designed to build universal interior lighting fixtures. This profile directs the light beam at an angle of 30° so you can achieve the effect of  mild accent illumination and avoid glare. It is to be mounted in corners (e.g. bodies of furniture, cabinets, where ceiling meets wall, shop windows).
 
The profile can also serve as a wall lamp fixture. The KOPRO-30 extrusion can be mounted with screws or bolts (suitable for a particular substrate) screwed into the walls of the profile which are not intended for LEDs. Holes for the bolts or screws should be drilled in places designated by the lines inside the extrusion. In drywall ceilings, the profile can be fixed using GP mounting springs.
The KOPRO-30 extrusion can also be mounted using mounting adhesives.
 
After the profile has been mounted, a shallow ‘tray’ is formed which can be used to route the power cables. The profile can be additionally equipped with two 10mm wide LED strips or one LED strip with a width of no more than 20 mm. There are two types of covers and 4 types of end caps which are dedicated for the KOPRO-30 extrusion.
technische Zeichnung